San Jose Navigation GPS Mobile Locator GM-158-USB Manual de usuario descargar pdf (Pagina 4)

www.malags.com

1.1 Unpacking and Inspection

Great care should be taken when unpacking the equipment. Be sure to

verify the contents shown on the packing list and inspect the equipment for

any loose parts or other damage. All packing material should be kept in the

event that any damage occurred during shipping. Any claims for shipping

damage should be filed to the carrier. Any claims for missing equipment or

parts should be filed with MALÅ Geoscience.

Note! Three serial numbers are attached, on the backside of the monitor,

under the control unit and on top of the antenna.

1.2 Repacking and Shipping

If original packing materials are unavailable, the equipment should be

packed with at least 80 mm of absorbing material. Do not use shredded

fibres, paper wood, or wool, as these materials tend to get compacted

during shipment and permit the instruments to move around inside the

package.

1.3 Important information regarding the use of

this GPR unit

According to the regulations stated in ETSI EN 302 066-1 (European

Telecommunication Standards Institute):

- The control unit should not be left ON when leaving the system

unintended. It should always be turned OFF when not in use.

- The antennas should point towards the ground, walls etc. during

measurement and not towards the air.

- The antennas should be kept in close proximity to the media under

investigation

1 2 3 4 5 6 7 8 9 ... 38 39

Sin comentarios

San Jose Navigation GPS Mobile Locator GM-158-USB Manual de usuario Pagina 4