San Jose Navigation CT-58 Guía de usuario

CT-58A GPS/GSM Micro Tracker Dec. 21st 2007 Version: 2.00 San Jose Navigation, Inc. 9F, No.105, Xicheng Rd., Banqiao City, Taipei C

5.2 Change Password Use this SMS message example shown below to change the password of CT-58A. For example, by following the example below, you wi

5.3 Set up the GPRS APN (Access Point Name) For uploading the data to a web server, you must have a set of GPRS APN from your GSM network. Various

5.4 Set up a Host Name (URL) to Transmit Data This command (SMS) instructs the CT-58A to access an URL or fixed IP for data transmission. If you se

5.5 Set up the Phone Number List Use this SMS message to predefine the cellular numbers (Max. of 5 numbers) by following the format below. Setup f

5.6 Set up Auto Report Use this command to set up the frequency of Auto Report. If you send the SMS according to the example shown b

5.7 All Parameters Reset to Default Use this SMS message to reset CT-58A to factory default. You can just send the SMS according to the example seen

5.8 Acquire Report of Current Position You can send the SMS according to the example shown below. It will transmit current data to the web server (UR

5.9 Set up E-mail Address to Receive Data In addition to receiving data from URL, you can also obtain data from a specified E-mail address via GPRS s

5.10 Set up SMTP Server After setting up the E-mail address, you still have to setup a SMTP server so that the CT-58A can use the SMTP server send E-

5.11 Set up Router for Transmitting Data by URL/IP or E-mail You can choose the router to transmit the data by URL/IP, E-mail or SMS message. Please r

Content Content...

The table 5.11.3 shows each confirmation message reply after setup. Table 5.11.3 Situation Message Reply [username] + Device is switching to HTTP/SMS

5.12 Request Imei Code Imei stands for international mobile equipment identification. We offer you a command to acquire the Imei number from CT-58A v

5.13 Deactivate Panic mode In this function, it helps you to deactivate panic mode forcedly. Please note the Panic sensor is connecte

5.14 Set up Panic Report Use this command to set up the frequency of Panic Report. If you send the SMS according to the example shown bel

5.15 Set up Voice Monitoring Mode This function allows the user to select “Overhearing” or “Dial Polling” feature. User can hear the voice around the

5.16 SOS Phone Setting While Panic function is triggered, CT-58A will automatically call the SOS phone number if this number is defined. The command

5.17 Setup Geofence Coordinate Users can setup the Geofence by using this command. The Geofence is defined as a round area. Therefore, the coordinate

0000  Default password.  If you have changed the password, please use the updated one. 17 Mode 17 is the Geofence report interval setting 0

5.18 Vibration Alarm Setting Vibration sensor is embedded in CT-58A tracker. You can use following commands to define vibration report as well as the

Enable Vibration Setup format: #username,0000,vs,on* Disable the vibration Setup format: #username,0000,vs,off,n* Example: #username,0000,

1. Hardware Description 1.1 Front Face Note: A. Yellow light will light on while data while communicating the data to computer B. Green light will

*Application of vibration of the tracker 1. 2. 3. 4. Hide the CT-58A in different places of the vehicle such as glove box, under the pas

5.19 Set up TCP/ UDP Address to Transmit Data If the user define to send the report to the TCP or UDP, please setup the TCP or UDP’s address by bel

5.20 AGPS Update The users can use this command to update AGPS data. Below is the command format. Setup format: #username,0000,au,0 or 1,update time*

6. Respond Messages This chapter shows you how to read and understand the different response messages sent from CT-58A. When CT-58A is in GPRS/SMS mo

6.1 Auto Report 6.1.1. Uploading Auto data to URL when GPS is fixed When execute the Auto Report according to the settings with a GPS fixed, CT-58

6.2 Emergency Response When GPRS is available, CT-58A will upload the data to the URL/e-mail. If the GPRS is not available, it will send the SMS inste

6.3 Polling Response 6.3.1. Uploading Poll data to URL when GPS is fixed When send an SMS to poll a report with a GPS fixed, CT-58A will upload a dat

6.4 Vibration Response 6.4.1. Uploading vibration data to URL/e-mail when GPS is fixed When there is GPS fixed, send a single SMS to the built-in numb

6.5 Geo Fencing Response 6.5.1. Uploading vibration data to URL/e-mail when GPS is fixed When there is GPS fixed, send a single SMS to the built-in nu

6.6 NMEA 0183 GPRMC Sentence $GPRMC ,123456.00 ,V ,3444.12553,N ,13521.45600,E , , ,020197 … Field# 1 2 3

1.3 Side Face(2) 1.4 Rear Face(Battery Cap) Data communication slot Power adapter hole I/O input slot Use your thumb to press the battery ca

7. Warranty Warranty Time Period and Repair Coverage SAN JOSE NAVIGATION, INC. warrants CT-58A to be free from all defects and malfunctio

1.5 Package Contents A. DC Adapter Charger B. Cigar charger C. User Guide

2. Specification SPECIFICATIONS Electrics Data Tri Band 850/1800/1900 or 900/1800/1900 Mhz Frequency 1575.42 Mhz Reacquisition < 1sec. Cold < 4

3. Features A. Panic(option) External panic button (option) can be connected to CT-58A. When panic button is pressed, CT-58A will send out SOS repor

5. Setup CT-58A currently provides 13 commands for setup. You can setup the CT-58A by following the instructions shown in this chapter via SMS from a

5.1 Change Username You can change the ID of CT-58A by below command format. No space is allowed between the characters. For example,